Continuous Rotating Shear

Technical and Design specification of the Continuous Rotating Shear:

• 8mm to 16mm TMT bar. Single Shear is sufficient for ingot rolling mills.
• The first cut of this shear is not accurate, but the subsequent cuts are very accurate. The material loss of first cut is compensated by the subsequent cuts.
• The motor power is only 50 KW, compared to 90, 130, 175 KW of Start Stop Flying Shear.
• The casing is vertically split to take the separating force during the the milli seconds when the cut is executed on the casing profiles instead of parting bolts.
• The blade holder is fitted with double cone torque couplings as a safeguard against the accidental overload.
• The Flywheels are provided to reduce the motor power. The flywheel intertia augments the cyclic cutting load.
• The gears are case carburised hardened & ground designed for minimum back lash.
• Shifter present for moving bars in path of blade
• Presence of servo motor for shifting line of rolling
• Shifter mechanism at shear exit where shifting is performed through pneumatic mechanism
• Main shear body with cover provided for safety of men & machinery