https://www.hotrollingmachinery.com Latest Products Thu, 21 May 2026 07:53:08 +0530 en-us https://www.hotrollingmachinery.com https://www.hotrollingmachinery.com/gears-gearboxes.htm https://www.hotrollingmachinery.com/gears-gearboxes.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/rolling-mill-parts.htm https://www.hotrollingmachinery.com/rolling-mill-parts.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/shears-shaw.htm https://www.hotrollingmachinery.com/shears-shaw.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/multistage-reduction-gearboxe.htm https://www.hotrollingmachinery.com/multistage-reduction-gearboxe.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/pinion-gearbox.htm https://www.hotrollingmachinery.com/pinion-gearbox.htm Wed, 06 Oct 2021 00:00:00 +0530 Technical and Design Specification Of The Pinion Gearbox: Precision engineered range of pinion gear boxes Gearboxes designed to achieve reduction in input speed to slower output speed Gearboxes featuring connected set of rotating gears that allow force to be transmitted or motion or torque to be changed Can deliver double/triple output shafts as demanded Heavy duty and sturdy finish designs that allows bearing overload conditions Stress relieved and aligned casing / housing / structure of Gear Box All gears ultrasonic tested to ensure superior finish All pitches of gears precisely checked https://www.hotrollingmachinery.com/reduction-cum-pinion-gearbox.htm https://www.hotrollingmachinery.com/reduction-cum-pinion-gearbox.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/single-stage-reduction-gearbox.htm https://www.hotrollingmachinery.com/single-stage-reduction-gearbox.htm Wed, 06 Oct 2021 00:00:00 +0530 Technical and Design Specification Of The Reduction Gearbox: The reduction gearbox includes two gears of same size teeth but different diameters. The number of teeth is kept proportional to the circumference of the gear; greater the diameter more the number of teeth. The gear with small diameter makes two revolutions for every one revolution of the gear with larger diameter. The amount of torque available on the larger shaft would be twice as much as that on the smaller one. Reduction gear box is a closed system in which the amount of input and output power remains constant. With the increased torques the speed decrease proportionally. https://www.hotrollingmachinery.com/gear-coupling.htm https://www.hotrollingmachinery.com/gear-coupling.htm Wed, 06 Oct 2021 00:00:00 +0530 Our Gear Coupling Possess the following Technical Specifications and Features: The hubs are completely machined from EN-8/EN-9 material forged, annealed and heat treated from 235-265 BHN The Casings are made out of EN-8/EN-9 forgings material up to 107 and Cast IS-1030 Gr 23/45, heat treated from 235-265 BHN above 107 The teeth cutting are done maintaining D.O.P /SPAN for required sliding tolerances. All parts are completely inter-changeable Range of Gear Couplings up to 119 Nos The Gear Couplings up to 110 are always in our ready stock Available In Various Configurations Excellent Inherent Balance Piloted Gear Ideal For Higher Speed And Less Vibration Piloted Gear Ideal For Higher Speed And Less Vibration Our Gear Coupling are Heavy duty, High speed, High torque capacity, Light in weight and cost effective. https://www.hotrollingmachinery.com/helical-gear.htm https://www.hotrollingmachinery.com/helical-gear.htm Wed, 06 Oct 2021 00:00:00 +0530 Technical and Design Specification Of The Helical Gears: Designed to transmit motion & power between either parallel or right angle shafts (90°, non-intersecting), which rotates in the opposite direction Dimensional accuracy Durable & ideal for high load applications Optimum performance helical gears are used in Industrial Gearsboxes, Automobiles, elevators, conveyors, compressors & blowers etc. Double Helical gears are placed in V shape as two mirrored helical gears joined together. The mirrored arrangement revokes net axial thrust as each half of gear thrusts in opposite direction. To operate in rotational directions, Double Helical gears are extended in two possible arrangements for oppositely oriented helical gears/gear faces, one stable and the other unstable. https://www.hotrollingmachinery.com/bearing-chock.htm https://www.hotrollingmachinery.com/bearing-chock.htm Wed, 06 Oct 2021 00:00:00 +0530 Bearing Chocks Features Complete size range Accurate design with fine machining Easy Lubrication Versatile design and easy structure Supreme quality, duly machined and grounded High strength https://www.hotrollingmachinery.com/flywheel-assembly.htm https://www.hotrollingmachinery.com/flywheel-assembly.htm Wed, 06 Oct 2021 00:00:00 +0530 Advantages of Flywheel Assembly Brilliant Gyroscopes Eco Friendly Ideal For Conserving Energy Remain Unaffected By Temperature Or Memory Effect https://www.hotrollingmachinery.com/roller-guide-box.htm https://www.hotrollingmachinery.com/roller-guide-box.htm Wed, 06 Oct 2021 00:00:00 +0530 Types of Roller Guide Boxes Roller Entry Guide Box Roller Mill Entry Guide Roller Guide Boxes Without Holder Entry Guiding Roller Boxes S S Body Roller Guide Box Industrial Roller Guide Box Stainless Steel Roller Guide Box https://www.hotrollingmachinery.com/v-belt-pulley.htm https://www.hotrollingmachinery.com/v-belt-pulley.htm Wed, 06 Oct 2021 00:00:00 +0530 Our Bar Bending Machine Possess the following Technical Specifications and Features: Available Size :  150mm - 3500mm Material :  CI Casting Best Quality Bearings & Plummer Blocks. A Pulley is a power transmission cum speed controller device which can be used at various places depending on the application and size. In Rolling Mills it is used between motor to flywheel so as to control speed, input speed as per the application. It is duly machined and balanced and comes in all groove sizes and bores. https://www.hotrollingmachinery.com/billet-shearing-machine.htm https://www.hotrollingmachinery.com/billet-shearing-machine.htm Wed, 06 Oct 2021 00:00:00 +0530 Our Billet Shearing Machine Possess the following Technical Specifications and Features: Machines are made to cut different sizes of billets, blooms, and slabs Prime MS Plate for body fabrications A weight control system of cut blanks Cutting capacity – 50 mm to 300 mm Gears train will be provided to facilitate operations with small power The specialized machine is used for cutting of stainless steel billet – 50 mm to 200 mm Body is fabricated from mild steel https://www.hotrollingmachinery.com/cold-shearing-machine.htm https://www.hotrollingmachinery.com/cold-shearing-machine.htm Wed, 06 Oct 2021 00:00:00 +0530 Our Cold Shearing Machine Possess the following Technical Specifications and Features: Manual and Automatic operation The tailor-made suit as per customer requirement Compact Design, Easy operatable, Easy Maintenance and Low power consumption Cutting capacity 8 mm to 32 mm TMT bars, 8 mm to 100 mm rounds/squares, plates, angles, channels & girders Capacity 1 Ton to 20 Ton per Hour Strokes per minute – 6 to 35 strokes https://www.hotrollingmachinery.com/rotary-shearing-machine.htm https://www.hotrollingmachinery.com/rotary-shearing-machine.htm Wed, 06 Oct 2021 00:00:00 +0530 Features : Used in form of pairs between roughing as well as intermediate finishing stands for cropping front & back ends in TMT Bars/Wire Rods Extensively finding application in cropping front, tail and also scrapping pre quenched bars at times of emergency Shears specifically designed for trimming of hot rolled bars at lower speeds Precision engineered frame fabricated using stress relived structural sheet flats Drive Gear Box developed using quality steel plate body and backed by superior oil lubrication support Shearing blades of superior grade steel Precision engineered forged shafts coming mounted to roller bearings with gear box connected through V-Belt and pulley Pneumatic cylinder for controlling shearing as well as swiveling operations of shears blades Dual rotary helical cutting blades that deliver excellent cut quality https://www.hotrollingmachinery.com/flying-shearing-machine.htm https://www.hotrollingmachinery.com/flying-shearing-machine.htm Wed, 06 Oct 2021 00:00:00 +0530 Features : The 1000 mm CRS (adding to the manufactures cost because with 1000 mm centres the depth of the shear also has to be increased leading to increased dia gears, shaft lengths, casing weight) instead of 800 or 850 CRS so as to reduce the base rpm of the drives Motor. Since it is a start stop shear the motor shall have to accelerate to lower (base) rpm hereby reducing power consumption on recurring basis and generate payback. The casing is pre-stressed to prevent separation of casing parting surfaces on load during the milli seconds when the cut is executed. The cutter ends are involute profiled at ends. The cutters engage before the bar touches the cutting edge, eliminating possibility of erroneous blade over lap. We provide an optional arrangement of Flywheel with mechanical clutch. The flywheel is engages for cutting above 20 mm bar size. The flywheel inertia augments the lower power available from constant torque motor running at low rpm to match thicker bar rolling speed. The casing front end and pinch roll cantilever shaft is water cooled to avoid distortion with heating. The gears are case carburised hardened & ground designed for minimum back lash. Again the gears and knife holders are designed for minimum intertia. https://www.hotrollingmachinery.com/hydraulic-plate-shearing-machine.htm https://www.hotrollingmachinery.com/hydraulic-plate-shearing-machine.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/continuous-rotating-shear.htm https://www.hotrollingmachinery.com/continuous-rotating-shear.htm Wed, 06 Oct 2021 00:00:00 +0530 Technical and Design specification of the Continuous Rotating Shear: 8mm to 16mm TMT bar. Single Shear is sufficient for ingot rolling mills. The first cut of this shear is not accurate, but the subsequent cuts are very accurate. The material loss of first cut is compensated by the subsequent cuts. The motor power is only 50 KW, compared to 90, 130, 175 KW of Start Stop Flying Shear. The casing is vertically split to take the separating force during the the milli seconds when the cut is executed on the casing profiles instead of parting bolts. The blade holder is fitted with double cone torque couplings as a safeguard against the accidental overload. The Flywheels are provided to reduce the motor power. The flywheel intertia augments the cyclic cutting load. The gears are case carburised hardened & ground designed for minimum back lash. Shifter present for moving bars in path of blade Presence of servo motor for shifting line of rolling Shifter mechanism at shear exit where shifting is performed through pneumatic mechanism Main shear body with cover provided for safety of men & machinery https://www.hotrollingmachinery.com/crop-cum-cobble-shear.htm https://www.hotrollingmachinery.com/crop-cum-cobble-shear.htm Wed, 06 Oct 2021 00:00:00 +0530 Features : Used in form of pairs between roughing as well as intermediate finishing stands for cropping front & back ends in TMT Bars/Wire Rods Extensively finding application in cropping front, tail and also scrapping pre quenched bars at times of emergency Shears specifically designed for trimming of hot rolled bars at lower speeds Precision engineered frame fabricated using stress relived structural sheet flats Drive Gear Box developed using quality steel plate body and backed by superior oil lubrication support Shearing blades of superior grade steel Precision engineered forged shafts coming mounted to roller bearings with gear box connected through V-Belt and pulley Pneumatic cylinder for controlling shearing as well as swiveling operations of shears blades Dual rotary helical cutting blades that deliver excellent cut quality https://www.hotrollingmachinery.com/hot-saw-blade.htm https://www.hotrollingmachinery.com/hot-saw-blade.htm Wed, 06 Oct 2021 00:00:00 +0530 Our Hot Saw Possess the following Features: Rolled section is gripped on the run out roller table Cuts heavier section with better straightness Heat resistant, Superior durability, Precise & sharp tooth and Corrosion free Easily cuts beam, channel and angle Increases the productivity of extrusion system Cuts every billet to the uniform size Removes trim front end https://www.hotrollingmachinery.com/allied-machinery.htm https://www.hotrollingmachinery.com/allied-machinery.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/tail-breaker-pinch-rolls.htm https://www.hotrollingmachinery.com/tail-breaker-pinch-rolls.htm Wed, 06 Oct 2021 00:00:00 +0530 Feayures : Cantilever and pneumatic type Pinch Roll & Tail Breaker up to 360 MM CRS. Top roll raised pneumatically or lowered with bottom roll in adjustable finish. Pinch roll housing comprising sturdy welded construction. Pinch rolls feature wear resistant surface with anti friction bearing mounting support. Spindle provided for meeting the needs of adjustment of bottom pinch rolls Pinch rolls featuring use of sensors that allows precision breaking up to speed of hot flowing material. https://www.hotrollingmachinery.com/section-straightening-machine.htm https://www.hotrollingmachinery.com/section-straightening-machine.htm Wed, 06 Oct 2021 00:00:00 +0530 Straightening Machines Possess the following Technical Specifications and Features: It compromises two straightening disks; one mounted on a straightening shaft and other against the flanges of the beams. These straightening disks are backed by a support ring of larger size. There are hydraulic cylinders, which aligned with the axially displaceable discs via adjusting pistons. Pr-hardened rolled beams are fed into the machine, which are used for straightening any rolled, drawn or extruded metals. Our Straightening machines are also equipped with all safety standards. These are easily operable, Highely durable and Cost effective. These are made to deliver highest output with highest efficiency. https://www.hotrollingmachinery.com/cantilever-type-pinch-roll-assembly.htm https://www.hotrollingmachinery.com/cantilever-type-pinch-roll-assembly.htm Wed, 06 Oct 2021 00:00:00 +0530 Feayures : Cantilever and pneumatic type Pinch Roll & Tail Breaker up to 360 MM CRS. Top roll raised pneumatically or lowered with bottom roll in adjustable finish. Pinch roll housing comprising sturdy welded construction. Pinch rolls feature wear resistant surface with anti friction bearing mounting support. Spindle provided for meeting the needs of adjustment of bottom pinch rolls Pinch rolls featuring use of sensors that allows precision breaking up to speed of hot flowing material. https://www.hotrollingmachinery.com/furnace-pusher.htm https://www.hotrollingmachinery.com/furnace-pusher.htm Wed, 06 Oct 2021 00:00:00 +0530 Furnace Pusher Features High-temperature uniformity Excellent resistance to corrosion Fully automatic operation https://www.hotrollingmachinery.com/furnace-ejector.htm https://www.hotrollingmachinery.com/furnace-ejector.htm Wed, 06 Oct 2021 00:00:00 +0530 Furnace Ejector Features Highly reliable operation Able to withstand harsh weather conditions Needs little or no maintenance https://www.hotrollingmachinery.com/bar-bending-machine.htm https://www.hotrollingmachinery.com/bar-bending-machine.htm Sat, 04 Jan 2025 00:00:00 +0530 The process of bending starts after Shearing of TMT Bars from Cold Shearing Machine installed after Cooling Bed. After shearing of Standard 12 meter long Bundle of TMT Bars, it will get transfer to another 12 Meter Conveyor through Skid type transfer cooling Bed. The whole set of Bundles of 40-50 TMT Bars get transfer together through this cooling bed to the conveyor. The skid transfer type cooling bed consists of Chain, Dog, Sprocket and structure. Skid Transfer Type Cooling Bed is 8+8 m = 16 Meter wide and 12 Meter long.  This is a slow speed transfer system, which keeps on moving at a very slow speed and paralley labor bundles 10 kg TMT Bars which automatically gets transfer to the Delivery Roller Table through kick off system. In this Skid Transfer type Cooling Bed, the short length of TMT Bars, (which is left at the end after cutting of all 12 Meter TMT Bars), are transferred at the end time. This short length material, after reaching to the conveyor from skid transfer, is thrown out at the open space. https://www.hotrollingmachinery.com/tying-machine.htm https://www.hotrollingmachinery.com/tying-machine.htm Wed, 06 Oct 2021 00:00:00 +0530 Our Bar Bending Machine Possess the following Technical Specifications and Features: Frame on base plate with 4 guiding wheels Binding unit with feeding and twisting unit and wire guide track. Hydraulic unit with pump and electric motor. Control console with control panel and programmable controller (PLC) Wire magazine for the binding wire https://www.hotrollingmachinery.com/billet-pusher.htm https://www.hotrollingmachinery.com/billet-pusher.htm Sat, 04 Jan 2025 00:00:00 +0530 https://www.hotrollingmachinery.com/chilled-rolls.htm https://www.hotrollingmachinery.com/chilled-rolls.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/forged-rolls.htm https://www.hotrollingmachinery.com/forged-rolls.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/hot-rolling-mill-stand.htm https://www.hotrollingmachinery.com/hot-rolling-mill-stand.htm Wed, 06 Oct 2021 00:00:00 +0530 MKES offers various types of mill stands mentioned below: 3-Hi Stands and 2-Hi Stands Mill Stand with Fibre bearing and Anti-friction Bearing Vertical & Horizontal Mill Stands Housing Less Mill Stands https://www.hotrollingmachinery.com/universal-coupling.htm https://www.hotrollingmachinery.com/universal-coupling.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/worm-reducer.htm https://www.hotrollingmachinery.com/worm-reducer.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/lubrication-system.htm https://www.hotrollingmachinery.com/lubrication-system.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/tmt-nozzle.htm https://www.hotrollingmachinery.com/tmt-nozzle.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/alloy-steel-rolls.htm https://www.hotrollingmachinery.com/alloy-steel-rolls.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/cardan-shaft.htm https://www.hotrollingmachinery.com/cardan-shaft.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/tmt-cooling-bed.htm https://www.hotrollingmachinery.com/tmt-cooling-bed.htm Wed, 06 Oct 2021 00:00:00 +0530 Features : We hold expertise in providing rack type automatic cooling beds from 9.5mtr up to 66mtr These can also be developed as per customer’s requirement We have with us rich industry experience of commissioning more than 20 automatic beds on a global scale The use of cooling bed of rack design is for providing uniform air-cooling to TMT bars It also helps in transporting in phased manner from entry of cooling bed to the discharge side Front end of bars leveled at discharge side with fixed number of bars provided for final length cutting through cold shear as well as bundling process Superior working mechanism of the bed ensures bars are positioned uniformly over toothed racks Cooling bed designed keeping in consideration smallest and maximum size of bars that need to be rolled from finishing mill stand as well as cooling time needed for different sizes of bars https://www.hotrollingmachinery.com/tmt-quenching-box.htm https://www.hotrollingmachinery.com/tmt-quenching-box.htm Wed, 06 Oct 2021 00:00:00 +0530 Our quenching boxes comprise of the Following Features Consistent ring formation Uniformity of the tensile strength along the length of the bar Motorized valves Corrosion free Less time consuming Supreme design Robust construction Closed frame to accommodate the forces in the sizing press Can operated under harsh conditions https://www.hotrollingmachinery.com/industrial-eot-crane.htm https://www.hotrollingmachinery.com/industrial-eot-crane.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/shutter-profile-machines.htm https://www.hotrollingmachinery.com/shutter-profile-machines.htm Wed, 06 Oct 2021 00:00:00 +0530 https://www.hotrollingmachinery.com/housingless-mill-stand.htm https://www.hotrollingmachinery.com/housingless-mill-stand.htm Wed, 06 Oct 2021 00:00:00 +0530 Features of Housingless Mill Stands : Fully Automatic Operation Component Rigidity with Reduced Stress Path Automatic Screw-down System with Axial Roll Adjustment Possibility for adjustment under load Roll balance system eliminating backlash Self-balancing spindle support for minimum wear Increased bearing life Automatic utility connections https://www.hotrollingmachinery.com/industrial-spindles.htm https://www.hotrollingmachinery.com/industrial-spindles.htm Wed, 06 Oct 2021 00:00:00 +0530 Our Gear Coupling Possess the following Features: Duly machined, Incomparable quality and durable Simple design, Easy to maintain Easily adoptable and usable Versatile design, Tailored to customer’s requirements Convey the drive even at 30 Degree Mal-Alignment Made from Forged Steel and High Quality Cast Steel Noise-free function High performance https://www.hotrollingmachinery.com/roller-conveyor.htm https://www.hotrollingmachinery.com/roller-conveyor.htm Wed, 06 Oct 2021 00:00:00 +0530 Roller Conveyor Features Chain Driven V-Belt / Pulley Drive Quality bearings Seamless pipe with tested shafts Quality Bearings for smooth running https://www.hotrollingmachinery.com/twin-channel.htm https://www.hotrollingmachinery.com/twin-channel.htm Sat, 04 Jan 2025 00:00:00 +0530 The Twin-Channel bar receiving mechanism comprise of the Following Twin water-cooled C-type channels with water cooling arrangement Supporting arrangement for the twin-channel and drive system Cam device for opening closing of the pipes Hydraulic drive for operation of the cams Prevention from warping Prevention from warping Highest level of safety since it is a closed channel for transferring bars It can be attached to braking pinch rolls https://www.hotrollingmachinery.com/vertical-edger-machine.htm https://www.hotrollingmachinery.com/vertical-edger-machine.htm Wed, 06 Oct 2021 00:00:00 +0530 Vertical Edger Possess the following Technical Specifications and Features: 40 HP Electric Motor Indepenent Hydraulic power source Double keyed mandrel is 2 15/16" Utilizes 2" bore hydraulic cylinders to enable saw shift Saw collars are shiftable also These are easily operable, Highely durable and Cost effective. Equipped with 20" diameter inserted tooth F Pattern saw blades